Farmhouse Chic!

My dad has come through for me once again! He is the greatest antique picker! I have been in need of a lampshade for a vintage glass lamp base that I've had for over a year!!! I have searched all the chain retail stores with no luck due to the fact that they are soooooo expensive! $15 and up for something that just sits on top of a light?! No thanks!

The solution: ask my dad to hunt down a unique frame that I can recover and he came through with a square scalloped bell frame shade. 

Once I removed the existing fabric and placed it on the base, I decided that I really loved the industrial look of the metal and didn't want to completely cover the frame. Burlap was the fabric touch this project needed to make it industrial farm chic! Lol

Materials
Lamp shade frame
Burlap ribbon
Jewelry wire
Jewelry tools 

Step 1: remove any glue or fabric residue from the frame with sand paper. (This took quite a while.)
Step 2: measure out and cut ribbon in to strips
Step 3: assembly requires making wire loops, looping them through the ribbon, and then clamping them. So no sewing or glue required!

Here is the finished project! I love that it is understated! It fits right in to the other small items on the table. It seems that I am obsessed with grouping items together in threes. The candy bowl and vase a both Vintage Jadite pieces ( one of my best antique purchases!) 

Antiquing is more about being in the right place at the right time rather than knowing what you are looking for. My purchase of 70 Jadite pieces for just over a $100 is proof. As any Jadite goes for $20 dollars and up for 1 piece. This is crazy to me! 

I'm Hooked!

I have just completed move #2 after living with my parents and am finally getting to some projects that are just not feasible in a one bedroom apartment with dogs who like to get into everything! I now have my very own CRAFT ROOM!!! It even comes with a reading nook!  Here are some pictures of the layout:

My first project was pretty simple. For some time, I have had these plain wooden key hooks made from trivets that have needed to be spruced up a bit. I chose to "white wash" them with three coordinating colors. This can be done within one 30-45 minute craft session....SO SIMPLE!!

Step 1: Paint an uneven base coat of white, leaving some bare wood showing through. This will allow the details of the design show through the layers of paint.

Step 2: Add water to your your paint (60% paint and 40% water). You want to thin it out so that it wipes off easier and allows the white to show through. 

Step 3: "White wash" the wood and wipe off with a damp paper towel or cloth. Make sure and leave most of the color in the grooves, showing the design. 

Step 4: Add felt to the back of the wooden hooks to prevent paint damage when hanging on the wall. (I learned this lesson when living in the apartment!) 

Step 5: Time to hang them on the wall. I used medium-long nails. (you may have to drill a nail hole if the design does not have hole that is centrally located.)

Total cost: $ 8.00 ( for acrylic paint and metal hooks, wooden trivets were FREE!!) 

I staggered mine to allow room for my dog leashes to hang straight rather than bunching on the the ground. I love how they turned out and am ready to tackle my next project... a refurbished lamp shade.

Spare Parts and the Chandelier Man

Never underestimate the power of stuff you have just laying around. I usually end up with leftovers from various craft projects and usually am stumped as to what to do with them next or how to store 1 or 2 random items; however, my dad is the king of spare parts!

His antiquing business has morphed from furniture to fishing lures to toy trains to chandeliers to upcycling and salvaging architectural items. Now, his booths hold a hodgepodge of items, but he is most famously know for his chandeliers and crystals, giving him the name "The Chandelier Man." On sight, you would not expect him to have this creative mind that turns metal odds and ends into sparkling beacons that women flock too, but this is the case! He just has a good eye and pays attention to trends. He also has a knack for finding road side deals. Some of his most current projects are technicolor furniture and architectural details. They are pretty awesome!

Memorial weekend my goal was to get 2 projects done. The first was featured in my "I've been Framed!" post and the second was turning a vintage wooden sewing spool into a bracelet holder. I had a simple vision in mind for this transformation, however, my dad's was better, of course. With a little advice from  him and some gifted spare parts, I ended up with the creme de la creme of bracelet holders. So, bare with me! This is a pretty long post because of the pictures and happy mistakes.

Materials:

Chandelier finnial

washer

vintage wooden spool

old lamp base

metal dowel with rivets

spray paint

paint samples

 antiquing glaze

sponge brush

cloth sponge

1. ASSEMBLY

2. SPRAY ON LIGHT BASE COAT               3. SPRAY ON WHITE TOP COAT

***optional step***

4. "Whitewash" the whole stand, using a paint sample of your choice. The mixture should be mixed 50/50 with water. Apply liberally in small sections. Next, wipe off the water/paint mixture using the cloth sponge, leaving whitewash in the grooves. This will bring out the details of the design of the lamp base and groves at the base of the spool (best to wipe vertically on the spool base).

5. Antiquing the stand. Follow the same process as above, using the sponge brush and the cloth sponge. The sponge brush should be damp for the best application.

 6.  Sanding edges of designs, riveting, and body of the spool. This will help the details standout as well as let the green come through. (***This may also be optional.***)

                   

START        TO 

FINISH

Different design options include: 

- wooden dowels inserted in the holes to hang bracelets

-a vintage glass/crystal doorknob as the top embellishment

- a wooden or more modern lamp base

And here it is on display.....

I've Been Framed!!!

The newest trend in the trash-to-treasure world seems to be oversized vintage, reclaimed, or even new ornate frames painted in colorful hues. The only catch to these gems is that now they are going for about $25 - $50 without the glass or backing. For this reason, I generally pass them up when I'm in a antique store and head to my local Goodwill or thrift shop. Garage sells are great places to spot them too!

I happened by this frame on an impulse stop on a lazy Saturday. The thrift store I found this fram in just happens to be less than a mile from my apartment! I purchased this vintage four layered bead board   frame for $15, giving me room to buy supplies for upcycling. The frame was heavily painted with a beige color and just looked too perfect. I felt I needed to rough it up a bit!!

 Materials:

sand paper

painters tape

sponge brush

cloth sponge

antiquing glaze  

1. Sand the bead board sections and the edges of the ornamentation of the other frame sections, bringing out the detailing.
2. Tape off the ornamentation.
 3. Dampen the sponge brush. This will help thin out the glaze as you apply it to the bead board 1 side at a time. (This allows you to wipe off excess before it drys.)

 4. Grab the cloth sponge and wipe off antique glaze leaving some in the groves, enhancing the detail. (This makes the designs pop even from afar!)
5. Remove the tape and you are finished.

 

Time for this project was about 30 minutes. I love the roughed up look and "imperfections" that were brought out by the sanding and antiquing glaze. Under the beige paint, there was a white plaster, which I didn't like the look of as I was sanding.(Fresh white is so not in! Well at least not in my magzine!) The glaze made it look like old wood and I was sold!!! You can see it in the top left corner. The frame also ended up having a great contrast between the layers.

For now, this project is labeled "to be continued." I'm not sure exactly what it's purpose will be: a picture frame, shadow box, bulletin board, chalkboard, cuckoo clock display, or home to another vintage find. So, stay tuned!!!

Dress It Up!!

Sometimes antiquing and shopping is about looking toward the future. What will it look like in this room or in that light? Is this necklace going to really go with multiple items? Then again sometimes its about finding inspiration for repurposing.

While some may love to by an item that is perfect on purchase, I often look for the items that can be morphed by some paint or dressed up a little to fit a new purpose. My newest find, a birdcage cardholder, was made to look old and as always Shabby Chic. Birds and birdcages seem to be the newest trend, so you should be able to find a similar item almost anywhere. Maybe even a vintage birdcage!!

For this item, I had a jewelry organizer in mind. The three hooks at the bottom are perfect for long necklaces that wont fit in my jewelry box. The height and number of horizontal bars created great hanging space for hook earrings as well as space to clip hair accessories. Of course, I'm a bit of a jewelry collector, so I needed a bit more store-to-display space. 

My project: Play dress up!

Materials:

 rustic twine

green embroidery thread

canvas pennants

bird themed scrapbooking pack

standard hole punch and small circle punch

Step 1: Pennants 

1. Cut embroidery string about 18 inches or as fits your frame/display.

2. Tie one side of and string pennants, leaving about an inch between each. (I threaded from the  bottom up.)

3. Tie off other end and then tie off places in the middle of the string of pennants to secure them as earrings will add weight causing them to shift. (I spaced the tie-offs evenly.)

4. Choose simple post earrings to display on the pennants. These work best as they carry little  weight. (Be careful as you poke the holes. You don't want to bend the post of the earring.)

Step 2: Hanging tags and other baubles 
1. Grab the rustic twine and create simple loops by folding the length in half, knotting the free ends. These will be used to hang pendants, hair clips, and earring tags.
2. Hannging is simple. Pull the loops through punched holes or rings of pendants. Wrap around a  horizontal bar and pull until the knot catches in the looped end. 

For tagged hanging, there is only the added step of hole punching or clipping with the shabby chic clips. (These came with the display! 

This project only took me about 45 minutes to 1 hour. Total cost of add-ons ~ $10.00 and I had plenty left over for future projects! I love how it turned out!! It's a jewelry scrapbook!!! 

    

Another bird inspiration piece came in the form of an earring holder. The shape of it made it difficult to clip and un-clip earrings, so when I moved I re-purposed it as a broach holder/display. It took the place of a dress form borrowed from my parents.

I love displaying in a functional and unique way. I hope you feel inspired! Coming soon....more bird inspired projects! 

 

 

Box of Blooms

Although I have lived in my apartment for 9 months now, I am still finding little projects to unpack, reorganize, and store for display. My recent inspiration came from a weekend reorganization mission. I uncovered a simple tin box in my storage trunk/coffee table. I love multipurpose items!!

It must have been gifted to me during my move. My dad would just throw things in there he thought i would like and turns out its perfect for the headbands I've been meaning to store as display. Why hide what's meant to be an ornament anyway!?!

The curved top prevents the flowers and feathers from getting squished and the dimensions allowed me to organize them in a way, which makes it look like a planter box. (Well maybe its a little overstuffed :) )

It is already on display in my bedroom. I'm not quite sure if this will be its permanent home but for now it works and is practical. I use this old medical stand as my everyday jewelry stand....projects to come are sitting on top (hint: more store to display made from a sewing bauble). Other items featured on the stand include:
      -an old metal "K" tucked in the basket below
      -vintage stand-up mirror (a $2 goodwill find)
      -my next project!!

I hope you enjoyed!! Come back soon!!

MAIN STREET

This week I went to a conference in Grapevine, Texas, which is approximately 30 minutes outside of Dallas. I loved it! Our hotel was conveniently located 2 minutes away from a new but old Main Street. On either side, my eyes beheld boutiques, resale shops, vintage/antique markets, and local eateries.

Leave it to me to go on a trip to a metropolitan region and come back with vintage finds. The original plan was to simply park and walk to Farina's Winery & Cafe (= awesome! Half price pizza during happy hour!!!); however, we were distracted by the dazzling glitter of trinkets and treasures from the corner store. Of course, we had to be "flexible" as our conference suggested and stop in. I meandered around the store filled with western wear, resale fashions, and antique trinkets....when all of the sudden I stumble onto a shining beacon of whites, creams, and pastels. BEHOLD the shabby chic booth!!!

My eyes don't know where to look and I immediately know I will not leave the store without at least one item. Turns out, I left with two. :)

Number 1: old iron hand in all its cream & rusty glory wrapped with lace ribbon
My vision: ring holder for my dresser and companion for my vintage child's shoe

Number 2: a pleasantly rusted three tiered basket tower
My vision: a caddy for all my towels, perfumes, lotions, and bathroom odds and ends

As ever, signing off as a satisfied customer!